Customizable Fin type refrigerator evaporator

Fin type refrigerator evaporator，The finned tubes are used when the heat or cold source is liquid, such as steam, water, or heat transfer oil. When a gas is to be heated or cooled by gas, a larger heat transfer area is required. The area of finned tube is several times or even 10 times more than the area of ordinary light tube. At this time, not only increase the heat exchange efficiency of the equipment, and greatly reduce the heat exchange

Fin type refrigerator evaporator, mainly used for drying system air heating, is the main equipment in the hot air device, radiator using the hot medium can be steam or hot water, can also be thermal oil, steam working pressure is generally not more than 0.8Mpa, the temperature of the hot air how to 150C below. Finned heaters and to be composed of air flow between the three rows of side-by-side spiral finned tube, SRZ-type cooling finned tube to the processing technology is the 0.5 * 10 mm steel strip with mechanical winding method, around the 18 mm seamless steel tube, and then hot retarded zinc, stainless steel and stainless steel can also be used and stainless steel band made of stainless steel radiator, SRL radiator is a rolled finned radiators with steel tubes and aluminum bands. Its radiator area per unit length is larger than that of SRZ type. Non-standard customized processing is available.

Fin type refrigerator evaporator radiator is a stainless steel double or multi-circuit air heat exchanger. This radiator is an improved product on the basis of SRZ and GL type, which can replace the use of SRZ type, I type and copper radiator, and is suitable for air heating or cooling of air heat exchange process in various industries.

Fin type refrigerator evaporator radiator finned tube is mainly made of stainless steel tube wrapped around the crumpled steel tape, its seamless stainless steel tube Φ18 × 2.0mm wrapped around the 10 × 0.3mm crumpled steel tape and become a piece of distance of 3.2mm, was spiral, the radiator are used in the argon arc welding, welding for pickling clean, strong anti-corrosion properties, clean and beautiful, long service life and so on, the working pressure of heat transfer medium is 2.0 MPa, the working temperature of 300 ℃ or less. MPa, working temperature below 300 ℃.